Customization: | Available |
---|---|
CAS No.: | 27306-78-1 |
Formula: | C13h34o4si3 |
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Product Name | ZINCA 2023 Polyether Modified Silicone Oil Agricultural Spray Adjuvant Silicone Surfactant |
CAS No. | 134180-76-0 |
Appearance | Clear, little yellow liquid |
Main Ingredient | Silicone |
Freezing point | <-1°C |
Cloud Point(1% Wt) | <10°C |
Specific Tension (0.1% aq.) | 19.0-23.0mN/m |
Viscosity (25ºC) | 10-60cSt |
Solubility | Dispersible in water |
Function | Spreading, penetrating |
Superiority | Quickly and thoroughly enhance the agro-chemical's penetrability, dispersity, absorption, transportion on the plant. |
Agricultural silicone surfactant (Organic silicone surface additive) Application:
It can be used as a spray modifier, foliar absorption aids, activation agent, widely used herbicide, liquid nutrients, growth
regulators, insecticides, fungicides, which do not decompose the original pesticide, can greatly reduce the surface tension of the
solution, reducing the contact between the droplet and the leaf angle, surface enhanced the liquid in the plant or pest surface
wetting, adhesion, and a spreader, thereby improving efficacy.
Silicone surfactant ZINCA-2000 is lower phytotoxicity and environmental hazards than the normal fatty amines, ethoxylated alcohol surfactant, and greatly reduce human and environmental impact.
How to Use:
Directly into the preparation of pesticide formulations or as a tank mix additives use.
The dosage is about 0.02 to 0.04% to the water and pesticide mixed( it means that add ZINCA-2000 3 to 6 grams to 15 kg of spray.
In the pesticide formulation of the preparation the concentrations is about 0.5 to 5%.
Note:
Because the surface tension of surfactant is very low, Please protect the eyes when using ZINCA-2000 and enhance personal
protection when spraying operations.
Package specifications: 5g / bags, 5g / bags * 50 bags / pack, or as per customer requirements.
Storage: 5 ~ 50 ºC sealed storage,
Expiry: 12 months.
Safety: The surfactant is non-dangerous goods.
Packing:
Polyether Modified Silicone Oil is available in 5kg plastic drums, 25kg plastic drums, 25kg Iron drums or200kg Iron drums.
Application precautions:
1) Mixing when used. The mixture is recommended to be used up within 24 hours after the mixing;
2) Easy to hydrolyze under acidic or alkaline conditions
Storage:
1.Shelf life: twelve months under normal temperature conditions.
2.Storage condition: It should be avoided to avoid long -term exposure to extremely cold and hot environments. Extremely cold and hot environments may lead to layered and drifting oil in the emulsion. If the product is layered, it is necessary to stir properly before use to make it uniform; if the product is frozen, the product needs to be placed slowly at room temperature and stirred properly at room temperature. Remember not to heat the product directly.
3.In order to ensure the quality of the product, the container should be used as soon as possible after opening, and the container must be tightly covered when not in use.