Zinca-6315 UV Cured Organic Silicone Rubber

• Customization: Available
• CAS No.: 63148-58-3
• Formula: Si
• Model NO.: ZINCA-6315
• EINECS: 00000000
• Status: Liquid Catalyst
• Response Type: Polymerization
• Classification: Homogeneous Catalysts
• Usage: Positive Catalyst, Cosmetics Additive
• Effect Size: Promoter Catalysts
• Manufacturing Method: Mechanical Mixing
• Application Industry: Industry
• Name: Phenyl Methyl Zinca Silicone Oil
• Application: Textile Printing Auxiliary, Dying Auxiliary
• Freezing Point Max: -40
• Viscosity: 75-1000
• Refractive Index: 1.48
• Flash Point Min: 280
• Transport Package: 5kg Plastic Drums, 25kg Plastic Drums, 25kg Iron D
• Specification: 5kg plastic drums, 25kg plastic drums, 25kg Iron d
• Trademark: ZINCA
• Origin: Anhui China
• HS Code: 39100000
• Production Capacity: 50000000

Product Description

Product Description

Ultraviolet cured organic silicone rubber
 
Chemical Name: UV cured one-component organic silicone rubber

Description

ZINCA-6315 is a one-component UV cured organic silicon rubber. This product has no solvents, translucent, and features thixotropy. It can be rapidly solidified by ultraviolet rays and easy to operate. After curing, the contraction rate is low,features low hardness, good flexibility and excellent adhesive performance, great electrical insulation characteristics, and high temperature resistance, weather resistance, heat resistance, and good yellowing resistance.

Parameters before curing: 

ITEMS	SPECIFICATION RANGE	TYPICAL VALUE
Appearance	One-component translucent liquid
Viscosity(Pa.s, 25ºC) (No.7, 20 rpm)	18.0~40.0	22.0

 

Parameters after curing: 

ITEMS	SPECIFICATION RANGE	TYPICAL VALUE
Appearance	Translucent solid
Density(g/cm³)	0.96~1.06	1.01
Hardness(Shore E)	45~70	58
Tensile strength(MPa)	≥0.40	0.56
Elongation break(%)	≥60	100
Pulling adhesion strength(MPa) (PCB/PC)	≥0.30	0.65
Thermal-conductive coefficient(W/m.K)	0.19
Dielectric constant(1MHz)	2.79
Surface resistivity(Ω)	≥10^14
Volume resistivity(Ω.cm)	≥10^14

Product's photo before curing:

Product's photo after curing:

Application

This product is applicable to various substrate materials for bonding and sealing, such as: metal, ceramics, glass, plastic, epoxy layer, etc. It can be applied to sealing and bonding of PCB system components, electronic control components, sealing lids, etc. Can also be applied to waterproof and moisture-proof protection of electronic components and other devices, as well as dust-proof protection of equipment such as machine tools.

Notes:
Pay attention to blocking ultraviolet rays and avoid ultraviolet light while using.
Before use, please remove the dirt, moisture, dust, etc. from the bonding surface
Cleaning the dipping device, avoiding pollution that causes defective adhesion

Recommended curing conditions:
UV-LED (365nm 300mW/CM2) *10s.

Precautions:
Stay away from children.
Recommended to use in good ventilated area.
If swallow by mistake, please vomit and seek medical treatment immediately.
If accidentally contact with the eyes, rinse the eyes with water immediately and go to the hospital for examination.
If expose to the skin, wipe it out with cloth or paper, and then adopt soap for thorough cleaning.
For details, please refer to the MSDS of this product.

Packaging & Shipping

Packing:

UV cured silicone rubber is available in 330ml/bottle

Storage:

The ideal storage condition of this product is a cool and dry place at 2-8ºC.
Shelf life:6 months.

Company Profile

Factory Show