Wholesale Silane Coupling Agent Kh-792, CAS No. 1760-24-3

Product Description

Product Description

CAS No. 1760-24-3 N-(2-aminoethyl)-3-aminopropyltrimethoxysilane Silane Coupling Agent Kh-792
N (β-aminoethyl) γ-aminopropyltrimethoxy-silane
CAS NO. : 1760-24-3
 
Foreign  Company's  Trademark:
A-1120(America  Union  Carbon)
Z-6020(Dowcorning)
KBM-603(ShinEtsu)
GF9(Wacker)

♣:Characteristics:
·Improve the mechanical properties of the composite material
·Strengthen the pollution-resistance
·Increase the cohesive force

♣:Application:
·composite additives
·Excellent adhesive force
·Artificial stone dedicated coupling agent
♣: Application and Feature
1. Improve the mechanical properties of composite materials
Using in unsaturated polyester composite material,can improve the mechanical property of the composite materials such as enhancing strength,improving toughness, especially can significantly improve the wet performance of the composite material.

2.Use in artificial quartz stone and agglomerated stone.In agglomerated stone, it process the surface treatment to the resin, which can significantly improve the tensile strength, bending strength, and bending modulus of elasticity of the artificial quartz stone and the agglomerated stone, also have great assistance to the anti-dirty ability and anti-foaming property of the product.

3.Improve the flexible property and its physical and mechanical properties.reinforce the filler's dispersing capacity in the resin system,also its water resistance,stain resistance,moisture resistant performance. Also with good permeability& wettability. Anti-foaming property&coupling effects.

4.Improve the antioxidant property significantly. It will not cause the base material yellowing in the process of cross-linking even long time placed.
5. Have great advantages:a).Good wettability; b).improve the impact resistance by 30-50%; c).The superior coupling performance;d).glass flake is not easy to fall off; e).Not easy yellowing.
♣: Addition method

1.Two main methods:
1).add to the resin directly and stir till uniform state, and then add the filler.
2) using diluent to dilute the silane to uniform state and spray it into the filler.(we suggest the 1st method as it make the silane evenly dispersed and improve utilization rate of the silane).

2. Volume of addition: we suggest about 8-12‰ of the resin dosage or According to the customer actual situation.

♣: Safety information
This information does not include the required safety information of using this product. refer to the MSDS and label of the container
to get the safety information of using the product, and also the about the harm to the body,environment and health
before operation.

♣. Valid period and storage
Sealed store in a cool,dry ventilated place. water and moisture proofing. Keep away from fire& light source. 

♣. Packing
Packed in plastic drums of 5Kg each,25Kg each,200Kg each 1000Kg each for customers option.

♣. Limited warranty information-Please read carefully
Based on the premise of honest and trustworthy, the information provided here should be considered to be accurate.However, as we can not control the conditions and methods of using this product.This information can't replace the test that our customer effect to ensure that our products are safe, effective and fully satisfied with specific end use.This manual is only about the use of products, the actual application effect depends on different kinds of application system. The advice we offer can not be seen as the cause of the infringement of any patent rights.
 

Product Parameters

 

 

Item	Index
appearance	Clear liquid
Assay	97.0% min
APHA( Pt-Co   )	25 Max
Density(20°C, g/cm3  )	1.010 - 1.030
Refractive Index(nD 25°C  )	1.439 - 1.447

Application

 

1. As an adhesion promoter, this product is suitable for polysulfide, polyvinyl chloride paste, silicone two-component, polyurethane and epoxy resin bonding and sealing agent.

2. As an additive for phenolic and epoxy moldings.

3. As a component of latex paint, adhesive and sealant.

4. Used as an adhesion promoter for one-component silane polyurethane adhesives based on organofunctional silane SPURSM technology.

  

Packing & storage:

1. Painted Iron drum or plastic drum , net weight 200Kg each, 1000kg per IBC 2, Sealed well, store in a cool, dry place. Avoid light.

Detailed Photos

 

Company Profile