Acrylic Silicon Resin Has The Effect of Protecting The Car to Protect The Car

• CAS No.: 27306-78-1
• Formula: 000000
• EINECS: 000000
• Environmental Protection: Yes
• Color: White
• Appearance: Liquid
• Model NO.: IOTA 6146A
• Kind: Plastic Surface Disposal Agent
• Usage: Degreasing, Protection, Descaling, Polishing, Colored, Pickling, Rust-Proof, Phosphating
• Acid-Base Property: Acidic Surface Disposal Agent
• Specific Gravity 25ºC: 1.020
• Refractive Index 25 ºC: 1.4430
• Cloud Point ( 0.1% Solution ): 40 ºC
• Urface Tension 25 ºC (Mn / M): 21.5
• Active Ingredient (%): 99.9
• Transport Package: 000000
• Specification: 5g / bag
• Trademark: Zinca
• Origin: China
• HS Code: 39100000

Product Description

Product Description
UV resin-belongs to a category of synthetic resin. However, compared with the traditional epoxy resin, it is very different, especially in the processing method.
*With the help of a special UV lamp, the UV resin is completely cured within a few minutes.
*It can be used without mixing with curing agent.
Convenient and efficient-no need to measure, proportion or require a long curing time like AB resin. Our UV resin is ready to use and can be cured immediately hard in minutes of UV light or sunlight.
High-quality transparent UV epoxy resin, with and self-degassing properties, curable smooth and transparent, glass luster. Anti-scratch, anti-fouling, and anti-yellowing.
Safe-high-quality non-toxic materials. There is a peculiar smell before curing, which is harmless, and disappears completely after curing.
Wide range of uses-transparent UV glue can be used for jewelry making, handicraft decoration, casting coatings, casting figurines, resin paintings, etc. It can also be mixed with mica powder, colorants, and glitter to obtain colorful finishes.

 

Physical and chemical Parameters:

Appearance: colorless to pale yellow transparent liquid

Specific gravity 25ºC: 1.020

Viscosity 25 ºC (cs): 20 ~ 40

Refractive index 25 ºC: 1.4430

Cloud point ( 0.1% solution ): 40 ºC

Water solubility: was transparent to translucent

Surface tension 25 ºC (mN / m): 21.5

Active ingredient (%): 99.9

Specification

roduct name	Agricultural silicone surfactant   Modified polytrisiloxane   Silicone spray adjuvant Wetting agent
Surface Tension:(0.1%Wt)	20.5
Appearance	Colorless Transperant
Specific Gravity (25°C)	1.002
Viscosity(25°C)	28
Cloud Point(1%Wt Aqueous Solution)	<10°C
Fuction	Improve the efficiency of pesticide penetration extension  resistant to rain erasion   Crop Protection   better spray treatment adhesion
Superiority	Super spreading and penetrating , environment friendly

How to Use?

Directly into the preparation of pesticide formulations or as a tank mix additives use.

The dosage is about 0.02 to 0.04% to the water and pesticide mixed( it means that add ZINCA-2000 3 to 6 grams to 15 kg of spray. In the pesticide formulation of the preparation the concentrations is about 0.5 to 5%.
 

Note:

Because the surface tension of surfactant is very low, Please protect the eyes when using ZINCA-2000 and enhance personal protection when spraying operations.

Package specifications: 5g / bags, 5g / bags * 50 bags / pack, or as per customer requirements.

Storage: 5 ~ 50 ºC sealed storage,

Expiry: 12 months.

Safety: The surfactant is non-dangerous goods.

 

Detailed Photos